All stock Parkway jars & caps are manufactured to meet average industry standards. These standards will not be suitable for all customer applications. Also minor variations in perceived quality occur between jars & caps of different sizes due to the fact that all of our molds are not of the same age, style or condition. For this reason, we request that the customer test enough samples of our jars & caps so as to decide whether or not our jars are suitable for the customer's intended application.

Samples: Will only be accepted and processed via fax, US mail or Parkway’s website located at www.parkwayjars.com.

Orders: Will only be accepted, processed and acknowledged via fax, mail or email. All prices are based on our standard materials, scheduling, packaging, and PPI QC Procedures. Special colors, materials, scheduling, packaging, inspection, QC Requirements are available by quotation and typically run 30% to 60% higher.

Terms: Net 30 to approved accounts and must be in US Funds. FOB Factory. To apply for Net 30 day terms please download a credit application at: http://www.parkwayjars.com/creditapps.php . We ask that your initial order be prepaid as credit applications can take up to 2 weeks to process depending on how quickly your vendors respond. Credit is not guaranteed.

Pre-Payment: We accept Cash, Money Order, Bank Check, Credit Cards (VISA, Master Card, Discover and American Express) and Wire Transfer for immediate pre-payment. Our wire transfer instructions are as follows:

Credit: Bank of America ~ 100 West 33rd St ~ New York, NY 10001 U.S.A.
To Further Credit: Parkway Plastics Inc ~ A/C# 00461-02665 ~ ABA Routing# 026009593

SWIFT CODE BOFAUS3N

Personal and Company checks are also accepted but will take up to 14 business days to clear the processing of bank. If you are paying by Personal or Company check your order will not be processed until 14 business days after we receive your check in house.

FOB Factory. Please be advised some of the items we sell are shipped from locations other than our 08854 warehouse. Customers are responsible to 100% of the freight costs associated with their orders.

Pallets: Parkway's products do not include pallets. Parkway recommends that styrene jars, custom orders and printed items be shipped on pallets. Pallets with shrink-wrap cost $ 7.50 per pallet.

Shipping: All items are shipped FOB Factory. Some of the items we sell are shipped from locations other than our 08854 warehouse. Customers are responsible to 100% of the freight costs associated with their orders.

Shipping Specifications: Current shipping specifications such as freight classifications, carton density, cubic ft, weight, piece count, and other packaging and/or shipment information are available on our website : http://www.parkwayjars.com/browse_regular_wall_jars.php

Freight Handling Charges: All UPS PP/A and All Prepaid Freight IN ADDITION TO any collect or third party shipment that are redirected to Parkway for payment will be increased to cover handling fees.

Damage in Transit: All items are FOB Factory. Once an item leaves Parkway's shipping dock it is no longer the responsibility of Parkway Plastics Inc. If damage occurs in transit it is the customer's responsibility to file a freight claim with the delivery company. This claim must be filed within 7 days, unless other arrangements have been made.

While your Parkway Plastics representative may do whatever they can to assist in this matter, Parkway Plastics is not liable for any damage that occurs in transit. This includes all styrene jars and Black Caps.

Parkway Plastics recommends that all styrene jars ship on pallets. Styrene jars shipped without pallets are not returnable. Black and Dark Colored Jars and Caps scuff. PPI is not responsible for scuffing. All Black and Dark Colored Jars and Caps are not returnable for any reason.

Damage: All claims must be made to Parkway Plastics Inc within 5 days after receipt of goods. Returns requested on items that have been outside Parkway's care for more than 30 days will not be accepted for any reason.

Returns: Prior Authorization is required for all returns. Once a return request is approved you will be issued an RGA Number and will be notified of the costs, if any, associated with your return. Items without a valid RGA number will be refused. Do not return anything without a valid RGA# as Not all items are returnable.

Jar Volumes are for Polystyrene. Due to shrinkage, Polypropylene volumes are approximately 5% less.

Jar Thread Finish: Our standard thread finish is CT-400 (Continuous Thread - 400) made to G.C.M.I (Glass Container Manufacturers Institute) specifications for all jars except 3oz 58mm Thick Wall and Regular Wall Jars. These jars are made to SPI (Glass Packaging Institute) specifications.

Cap Thread Finish: Parkway Plastics' cap thread finishes are manufactured to SPI specifications.

Cap liner: All lined caps are lined with our selection of TRISEAL F217 or equivalent liner material. Specialty liners are quoted separately. All liners are glued in unless otherwise instructed. This includes our natural lined caps.

Cap Information: Ribbed caps have both smooth and matte tops. Please make sure to specify which finish you are interested in when placing your order. Our standard finish when one is not specified is matte.

Domed cap liners are not glued in, but press fit, also know as friction fit. It is not unusual for press fit liners to fall out of the cap during storage or transport. PPI assumes no responsibility for liners that fall out in transit. Styrene caps and Domed caps cannot be lined with PS-22 Liners.

PS - 22 Liner comes plain or printed with "Sealed for your protection". Please specify what finish you would like when placing your order. Our standard finish when one is not specified is plain. There will be no exchanges excepted for PS-22 liners (plain for printed) unless printed was specified on your order and was missed by customer service.

83mm Caps are not returnable.

Custom Caps: Custom colors, special lining or secondary processes is available on a quotation basis. Parkway Plastics Inc will not be responsible for the scuffing or marring of caps. Scuff marks are more noticeable on black or dark color caps and are not returnable.

Custom Services: All stock Parkway jars are manufactured to meet average industry standards. These standards will not be suitable for all customer applications. Also minor variations in perceived quality occur between jars of different sizes due to the fact that all of our molds are not of the same age, style or condition. For this reason, we request that the customer test enough samples of our jars so as to decide whether or not our jars are suitable for the customer's intended application. If you find that our standard jar is not suitable for your application, we will be happy to review your needs and quote any special services that may be needed to meet your QC requirements. Custom Services tend to run 30% to 60% higher.

Decorating Minimum Runs: Minimum runs for all of Parkway's Decorating Processes is 50,000pcs. Prices for smaller runs, 10,000pcs and above are available upon quotation.

Flame Treating: All Items Printed by PPI are flame treated where necessary. Items not printed by PPI may be flame treated at $30.00/m per side for sizes up to 58mm, $35.00/m per side for 63mm to 89mm, $45.00/m per side for 100mm to 120mm. Flame Treating is a temporary process. Jars should be labeled or printed on as soon as possible. Minimum order quantity is 50,000pcs.

Printing Prices: Printing prices are based on average PPI requirements and approval of final artwork and printing specifications. Minimum printing gap of 1/2" required based on artwork fitting on jar. For custom items or special inks add 10% to the standard printing prices. We reserve the right to over/under ship by 10% Orders for exact quantities add 5% to the total price of the order.

Artwork Charges: Parkway expects to work from camera-ready artwork. Art Adjustment charges are quoted and billed separately but are approximately $150 per pass. Camera ready artwork can be submitted to our artwork department at sales@parkwayjars.com in .gif, .jpg, and .pdf formats.

Offset Printing: Plate charges are $150.00 per plate. Some jobs may require more than one plate per color. Plate charges do not include artwork or prep charges, which are quoted and billed separately. Imprint or color changes are $75.00 per change.

Silkscreen Printing: Silkscreen charges are $150.00 per print job. Most jobs require one screen per pass (or per color). Screen charges do not include artwork adjustment charges or preparation charges, which are quoted and billed separately.

Printing Pre-production Run: All printed orders are run according to our interpretation of commercial acceptability in regards to color matching, ink lay down, and artwork position on the container. Customers who wish their job run according to their standards must request a pre-production run sample at a cost of $375.00 per sample run, plus the per piece price. One box minimum.

PPI CERTIFIES THAT THESE GOODS WERE PRODUCED IN COMPLIANCE WITH THE FAIR LABOR STANDARDS ACT AS AMENDED AND WITH THE EQUAL OPPORTUNITIES ACT.
Parkway Plastics Inc. manufactures in accordance with GOOD MANUFACTURING procedures.

Warranty Information
Stringent product requirements normally require premium priced materials, and or premium priced manufacturing services, for satisfactory product and package performance. For this reason, we make no warranties, expressed or implied, as to the performance of our products with any specific product, or its suitability for any specific use. We will however, be happy to supply the customer and/or end user, with any and all samples, at nominal charges, that may be required by the customer and or end user may judge the degree of product compatibility, suitability of use, and overall package / application performance

Parkway Plastics is closed for preventative maintenance during the first two weeks of July
Not responsible for typographical errors!